Sabroe SAB 128Код: SAB 128 Цена:
не указана
Цена в руб.:
не указана
Винтовой компрессор Sabroe SAB 128 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pos. | Designation | No | Part no. |
| Complete compressor for male drive | 4161-074 | ||
| Complete compressor for female drive | 4161-073 | ||
| Compressor housing | |||
| 10 | Rotor housing | 1 | 3011-021 |
| Bearing cover at suction end | |||
| 20 | Bearing cover | 1 | 3013-143 |
| 21 | O-ring dia 304.39 x 3.53 | 1 | 1331-112 |
| 22 | Cylindrical pin dia 12 x 40 | 2 | 1445-084 |
| 23 | Socket cap screw M12 x 35 | 16 | 1413-387 |
| 24 | Threaded plug with collar 1/2" | 1 | 1343-027 |
| 25 | Gasket dia 27/21 x 1,5 | 1 | 2356-133 |
| Bearing cover at discharge end | |||
| 40 | Cover | 1 | 3013-052 |
| 43 | Cylinder screw M10 x 35 | 6 | 1413-373 |
| 44 | Adjusting screw | 2 | 2111-122 |
| 45 | Locking screw M6x 10 | 4 | 1413-231 |
| Capacity regulating cylinder | |||
| 50 | Cylinder | 1 | 3043-010 |
| 51 | O-ring dia 82.14x3.53 | 1 | 1331-077 |
| 52 | Cylinder screw M10 x 35 | 3 | 1413-373 |
| Cover for capacity regulating cylinder | |||
| 60 | Cover | 1 | 3013-193 |
| 61 | O-ring dia 88.49 x 3.53 | 1 | 1331-079 |
| 62 | Cylinder screw M8 x 25 | 4 | 1413-357 |
| Housing for capacity indicator | |||
| 70 | Housing | 1 | 3045-002 |
| 71 | Cylinder screw M6 x 30 | 4 | 1413-343 |
| 72 | Cover for capacity indicator | 1 | 3045-003 |
| 73 | Cylinder screw M6 x 50 | 4 | 1413-347 |
| 74 | O-ring dia 98.02 x 3.53 | 1 | 1331-081 |
| 75.1 | Glass for indicator | 1 | 3045-006 |
| Shaft seal cover | |||
| 80 | Shaft seat cover | 1 | 3013-051 |
| 81 | O-ring dia 85.32 x 3.53 | 1 | 1331-078 |
| 82 | Cylinder screw M10 x 35 | 4 | 1413-373 |
| 83 | Driving pin dia 4 x 8 | 1 | 1446-011 |
| 86 | Hose connection 1/4" | 1 | 1343-025 |
| 87 | Plastic hose 3/16" | 1 | 1241-190 |
| 88 | Plug 1/4" | 1 | 1345-025 |
| 89 | Gasket dia. 19/14 x 1.5 | 1 | 2356-124 |
| Cap cover | |||
| 90 | Cap cover | 1 | 3013-050 |
| 91 | O-ring dia 85.32 x 3.53 | 1 | 1331-078 |
| 92 | Cylinder screw M10 x 35 | 4 | 1413-373 |
| Cover for slide stop | |||
| 100 | Cover | 1 | 3013-057 |
| 101 | O-ring dia 66.27 x 3.53 | 1 | 1331-072 |
| 102 | Cylinder screw M10 x 35 | 3 | 1413-373 |
| 103 | Retainer for spindle bearings | 1 | 3044-013 |
| 104 | Cylinder screw M6 x 20 | 4 | 1413-341 |
| 105 | Locking plate | 1 | 2114-043 |
| Rotors and suction end bearings | |||
| 110 | Set of rotors for SAB 128H, female drive | 1(F) | 3024-018 |
| 110 | Set of rotors for SAB 128 H, male drive | 1(M) | 3024-109 |
| 111 | Roller bearing | 2 | 1513-016 |
| 112 | Retainer pin for male rotor | 1 | 3021-012 |
| 113 | Oil splash ring | 1 | 1437-217 |
| 114 | Thrust washer | 2 | 3021-035 |
| 115 | Cylinder screw M12 x 35 | 2 | 1413-387 |
| 118 | Driving pin dia 4 x 8 | 1 | 1446-019 |
| 119 | Retainer pin for female rotor | 1 | 3021-017 |
| 120 | Balance piston, suction end | 1 | 3025-007 |
| Discharge end bearings, female rotor | |||
| 130 | Balance piston dia. 64 | 1 | 3025-016 |
| 131 | Radial roller bearing dia. 40/90 x 33 | 1 | 1513-016 |
| 132 | Four point bearing dia. 40/90 x 23 | 1 | 1513-027 |
| 133 | Set of shims dia- 70/90 for adjusting the | 1 | 2124-080 |
| clearance between the rotor and outlet port | |||
| comprising: 1 off thickness 0.49mm | |||
| 1 - 0.52mm | |||
| 1 - 0.55 mm | |||
| 1 - 0.58 mm | |||
| 1 - 0.61 mm | |||
| 1 - 0.64mm | |||
| 1 - 0.67mm | |||
| Discharge end bearings, male rotor | |||
| 135 | Balance piston dia 64 | 1 | 3025-016 |
| 136 | Radial roller bearing dia 45/100 x 36 | 1 | 1513-012 |
| 137 | Four point bearing dia 45/100 x 25 | 1 | 1513-028 |
| 138 | Set of shims dia 80/100 for adjusting the | 1 | 2124-081 |
| clearance between the rotor and outlet port | |||
| comprising: 1off thickness 0.49mm | |||
| 1 - 0.52mm | |||
| 1 - 0.55 mm | |||
| 1 - 0.58 mm | |||
| 1 - 0.61 mm | |||
| 1 - 0.64mm | |||
| 1 - 0.67mm | |||
| Discharge ports | |||
| 140 | Discharge port for male rotor | 1 | 3031-037 |
| 141 | Discharge port for female rotor | 1 | 3031-038 |
| 142 | Socket cap screw M8 x 120 | 6 | 1413-314 |
| 143 | Sealing ring dia 13/8 | 6 | 3049-006 |
| 144 | Set screw M 10x20 | 2 | 1413-252 |
| 145 | Set screw M1 Ox 10 | 2 | 1413-253 |
| 146 | Blank off screw | 2 | 1343-027 |
| 147 | Locking screw M 10 x 10 | 2 | 1413-253 |
| 148 | Adjusting screw M10 x 20 | 2 | 1413-032 |
| 149 | Gasket | 2 | 1331-427 |
| Parts for adjusting rotors | |||
| 151 | Thrust cover for male rotor | 1 | 3013-053 |
| 152 | O-ring dia 91.67 x 3.53 | 1 | 1331-080 |
| 153 | Thrust cover for female rotor | 1 | 3013-054 |
| 154 | O-ring dia 82.14 x 3.53 | 1 | 1331-077 |
| Shaft seal | |||
| 160 | Shaft seal type 680. | 1 | 1332-161 |
| Suction filter | |||
| 170 | Suction filter | 1 | 3042-081 |
| 171 | Set screw M6 x 10 | 3 | 1413-231 |
| Adjusting system for Vi-slide | |||
| 180 | Spindle | 1 | 3044-012 |
| 182 | Spacer ring | 1 | 3044-014 |
| 183 | Sealing ring dia 28/22 | 1 | 1331-503 |
| 184 | O-ring dia 44.04 x 3.53 | 1 | 1331-065 |
| 186 | Spindle bearing | 2 | 1512-015 |
| Slide stop | |||
| 190 | Slide stop (included in pos. 192) | ||
| Man. Vi-slide | |||
| 191 | Spring | 1 | 1523-014 |
| 192 | Slide control (including slide stop, pos. 190) | 1 | 3044-071 |
| 193 | Socket cap screw M10 x 25 | 1 | 1413-371 |
| Capacity regulating slide | |||
| 200 | Slide | 1 | 3043-175 |
| 201 | Inner piston part | 1 | 3043-075 |
| 202 | Outer piston part | 1 | 3043-076 |
| 203 | O-ring dia 53.57 x 3.53 | 1 | 1331-068 |
| 204 | Sealing ring dia 90/80 | 1 | 1332-118 |
| 205 | Cylindrical pin dia 6 x 12 (incl. in pos no 207) | (1) | 1445-075 |
| 206 | Cylinder screw M6 x 25 | 4 | 1413-342 |
| 207 | Piston rod | 1 | 3043-112 |
| 208 | Tape bearing | 2 | 2132-105 |
| 209 | O-ring dia 9,12 x 3,53 | 1 | 1331-215 |
| Spindle for capacity indication | |||
| 210.1 | Spindle | 1 | 3045-057 |
| 216 | Magnetic coupling | 1 | 3045-061 |
| 217 | O-ring dia. 44,12 x 2,62 (incl. in pos. 216) | (1) | 1331-146 |
| 218 | Hexagon head screw M4 x 16 (incl. in pos. 216) | (1) | 1413-320 |
| 219 | Hexagon head screw M4 x 20 (incl. in pos. 216) | (2) | 1413-322 |
| Capacity indication | |||
| 221 | Indicator dial | 1 | 3045-001 |
| 223 | Cylinder screw M4 x 10 | 1 | 1413-319 |
| 224 | Supporting ring | 1 | 2356-155 |
| 226 | Locking washer DC 15/8,4 | 1 | 1437-054 |
| 227 | Locking washer DC 8/4.3 | 1 | 1437-060 |
| Suction gas inlet | |||
| 252 | O-ring dia 190.09 x 3.53 | 1 | 1331-105 |
| 253 | Inlet flange | 1 | 3013-130 |
| 254 | Cylinder screw M16 x 45 | 8 | 1413-433 |
| 257 | Plug 1/4" | 1 | 1343-025 |
| 258 | Gasket ring dia. 21/14 x 2,0 | 1 | 1331-428 |
| 259 | O-ring dia. 20,22 x 3,53 | 1 | 1331-019 |
| Non-return (check) valve | |||
| 260 | Valve cone | 1 | 3042-107 |
| 261 | Spring | 1 | 1523-033 |
| 262 | Cylinder screw M10 x 25 | 1 | 1413-371 |
| 263 | Adaptor | 1 | 3042-079 |
| 264 | Tape bearing dim 10x1 x 136 | 2 | 2132-099 |
| 265 | Locking device for non-retun valve | 1 | 3042-108 |
| 266 | Pointed screw M6 x 6 | 1 | 1413-229 |
| Suction side connection | |||
| 279 | Flange | 1 | 3013-130 |
| 280 | Cylinder screw M16 x 45 | 8 | 1413-433 |
| 281 | O-ring dia 190.09 x 3.53 | 1 | 1331-105 |
| Economizer inlet | |||
| 290 | Flange with plug | 1 | 3013-135 |
| 291 | Cylinder screw M10 x 30 | 2 | 1413-372 |
| 292 | O-ring dia 29.74 x 3.53 | 1 | 1331-025 |
| HLI Inlet | |||
| 300 | Flange with plug | 2 | 3013-136 |
| 301 | Cylinder screw M10 x 30 | 4 | 1413-372 |
| 302 | O-ring dia 20.22 x 3.53 | 2 | 1331-019 |
| Connecting parts for slide rod | |||
| 310 | Washer for slide rod | 1 | 3043-108 |
| 311 | Cylinder screw M10 x 55 | 1 | 1413-377 |
| External oil piping | |||
| 320-1 | Pipe set complete, female drive | 1 | 3049-021 |
| 320-2 | Pipe set complete, male drive | 1 | 3049-031 |
| 325-1 | Orifice dia. 5,0 for oil injection pipe - R717 | 1 | 3142-052 |
| 325-2 | Orifice dia. 3,2 for oil injection pipe - R22 and HFC's | 1 | 3142-054 |
| 331 | Plug 1/2" | 1 | 1343-027 |
| 332 | Gasket ring dia. 28,5/21.6 x 2,3 | 1 | 1331-430 |
| 333 | Plug 1/4" | 1 | 1343-025 |
| 334 | Gasket ring dia. 24/14 x 2,0 | 1 | 1331-428 |
| 335 | Plug 1/4" | 1 | 1343-025 |
| 336 | Gasket ring dia. 21/14x2,0 | 1 | 1331-428 |
| 337 | Plug 3/4" | 1 | 1343-028 |
| 338 | Gasket dia. 34,93/27.13 x 2,34 | 1 | 1331-433 |
| Electrical signal transmitter for | |||
| capacity slide position (optional) | |||
| 350 | Turning transmitter | 1 | 3448-004 |
| 351.1 | Sight-glass for transmitter | 1 | 3045-007 |
| 352 | Screw for transmitter | 4 | 1412-012 |
| M3 x 8(included in pos. 350) | |||
| Limitation of minimum capacity (optional) | |||
| 228 | Spacer ring for SAB 128H | 1 | 3045-028 |
| 229 | O-ring dia. 82.14x3.53 | 1 | 1331-077 |
| 210.2 | Spindle | ||
| replaces pos. 210.1 | 1 | 3045-063 | |
| Limitation of minimum capacity (optional) | |||
| 75.2 | Glass for indicator, SAB 128/163 | ||
| replaces pos. 75.1 | 1 | 3045-036 | |
| 351.2 | Glass for indicator for turning transmitter, SAB 128/163 replaces pos. 351.1 | 1 | 3045-037 |
| Oil filter parts | |||
| 450 | Cover | 1 | 3041-008 |
| 452 | O-ring dia 132,94 x 3,53 | 1 | 1331-093 |
| 453 | O-ring dia 101,19 x 3.53 | 1 | 1331-083 |
| 455 | Locking nut M10 | 1 | 1433-080 |
| 456 | Cylinder screw | 4 | 1413-387 |
| 458 | Stay bolt | 1 | 2111-129 |
| 459 | Magnet | 4 | 1517-022 |
| 460 | Intermediate ring | 4 | 3424-039 |
| 461 | Elastomer ring | 2 | 1334-012 |
| 470 | Filter element | 1 | 1517-121 |
| 471 | Plug 1/4" | 1 | 1343-025 |
| 472 | Gasket ring dia. 21/14 x 2,0 | 1 | 1331-428 |
| 473 | O-ring dia. 20,22 x 3,53 | 1 | 1331-019 |
| 480 | Filter housing | 1 | 3042-084 |
| 481 | O-ring dia 183,74 x 3,53 | 1 | 1331-104 |
| 482 | Cylinder screw M8 x 25 | 4 | 1413-357 |
| 483 | Pointed screw M6 x 8 | 3 | 1413-230 |
| Flow switch arrangement | |||
| 500 | Terminal box | 1 | 1554.001 |
| 505 | Nippel | 1 | 2314-106 |
| 506 | Dowty ring 34,9/27,1 x 2,3 | 1 | 1331-433 |
| 507 | Flow switch with ball | 1 | 1553-024 |
| 508 | Washer | 1 | 2114-046 |
| 509 | Gasket ring 19/14 x 1,5 | 1 | 2356-124 |
| 510 | Spring | 1 | 2144-041 |
| 511 | Circlip (part of pos. 507) | 1 | |
| Compressor relief valve system | |||
| 700-1 | Back pressure independent safety valve, | 1 | 2416-202 |
| BSV8, 18 bar | |||
| 700-2 | Back pressure independent safety valve, | 1 | 2416-203 |
| BSV8, 20 bar | |||
| 700-3 | Back pressure independent safety valve, | 1 | 2416-204 |
| BSV8. 21 bar | |||
| 700-4 | Back pressure independent safety valve, | 1 | 2416-224 |
| BSV8, 22 bar | |||
| 700-5 | Back pressure independent safety valve, | 1 | 2416-205 |
| BSV8, 25 bar | |||
| 701 | Connection line, POV 40, dia. 12 | 1 | 3014-013 |
| 702 | Cylinder screw M12 x 35 | 4 | 1413-387 |
| 703 | O-ring dia. 82,14x3,53 | 1 | 1331-077 |
| 704 | Main valve POV 40 including connection pipe | 1 | 3014-011 |
| 715 | Cover | 1 | 3013-180 |
| 716 | Cylinder screw M14 x 90 | 4 | 1413-417 |
| 717 | O-ring dia. 69,44 x 3,53 | 1 | 1331-073 |
| 721 | Cylinder screw M12 x 30 | 4 | 1413-386 |
| 722 | O-ring dia. 63,09 x 3.53 | 1 | 1331-071 |
| 725 | Banjo coupling | 1 | 1349-091 |
| 726 | Al gasket, dia, 24/13 x 1,5 | 1 | 2356-127 |
| 727 | Reducer G 3/4-G 3/8" | 1 | 2312-038 |
| 730 | Union nut G 1"-3/8" | 1 | 2469-070 |
| 732 | Al gasket, dia- 30/16 x 1,5 | 1 | 2356-137 |
| Temperature/pressure transducers | |||
| 751 | Pressure transducer, suction gas (PT1) | 1 | 1373-249 |
| 752 | Pressure transducer, oil after filter (PT3) | 1 | 1373-271 |
| 753 | Pressure transducer, oil before filter (PT4) | 1 | 1373-271 |
| 755 | Coupfing 10-RL | 2 | 1349-137 |
| 756 | Elbow coupling 10-RL | 1 | 1349-154 |
| 761 | Temperature transmitter, compressor oil (TT6) | 1 | 1373-281 |
| 762 | Temperature transmitter, suction gas (TT7) | 1 | 1373-282 |
| 765 | Gasket ring - DKA R 1/4 | 2 | 1349-135 |
Spare parts survey for SAB 128 Mk3 unit
| Regulating & Control delice | Pos. | Designation | Part no. |
| UNISAB II | |||
| PT1 | Pressure transducer -1-9 bar | 1373-249 | |
| PT2 | Pressure transducer -1 - 25 bar | 1373-250 | |
| PT3 | See PT2 | ||
| PT4 | See PT2 | ||
| TT5/6/7 | Temperature transducer PT100 | 1373-264 | |
| GT8 | Position transmitter (capacity) | 3448-004 | |
| GT9 | See GT8 | ||
| UNISAB II Frontpanel | 1573-007 | ||
| 1 CPU-module | 1572-017 | ||
| 1 Relay print | 1574-014 | ||
| 1 EPROM extractor | 1613-002 | ||
| 1 EEPROM extractor | 1613-003 | ||
| 1 EEPROM | 1571-015 | ||
| 3 Jumpers | |||
| 2 Fuses | 1572-018 | ||
| 1 Screw driver | |||
| Refrigerant system | Suction: | ||
| 20 | O-ring dia 132,94 x 3,53 | 1331-093 | |
| Set of gaskets for SCV80 (R717) | 3184-078 | ||
| Set of gaskets for SCV100 (R22) | 3184-079 | ||
| 24 | |||
| 34-35 | Set of gaskets for SNV 8 | 2453-053 | |
| 47-48 | |||
| Oil separator, general: | |||
| 30 | Sealing ring dia. 42/49 x 6,5 | 1349-213 | |
| 30 | Heating rod, 250 V | 3181-038 | |
| Heating rod. 115V | 3181-039 | ||
| Heating rod, 230 | 3181-040 | ||
| 31 | O-ring dia 52.07 x 2.62 (sight glass) | 1331-140 | |
| Sight glass | 1226-017 | ||
| 55 | O-ring dia 329,57 x 5,33 (for cover) | 1331-184 | |
| Oil seperating element | 1517-062 | ||
| Oil return: | |||
| 52 | Nozzle valve | 1364-151 | |
| 53 | Sight glass | 1226-014 | |
| 53 | Gasket dia. 40.5/33 x 1.5 | 2356-144 | |
| Discharge: | |||
| 204 | Set of gaskets for SCV65 | 3184-078 | |
| O-ring dia 78,97 x 3,53 | 1331-076 | ||
| 22 | Safety valves: | ||
| 28 | DN 25/40 | ||
| Gasket, dia. 57/43 x 2 | 2356-260 | ||
| Gasket, dia. 75/61 x 2 | 2356-220 | ||
| O-ring dia. 61,60 x 2,62 (house) | 1331-143 | ||
| Conical seal for DN 25/40 | 1365-077 | ||
| Spring (for 25 Bar opening pressure) | 1365-046 | ||
| 28 | DN 40/65 | ||
| Gasket, dia. 75/61 x 2 | 2356-220 | ||
| Gasket, dia. 109/95 x 2 | 2356-222 | ||
| O-ring dia. 91,94 x 3,53 | 1331-080 | ||
| Conical seal for DN 43,65 | 1365-079 | ||
| Spring (for 25 Bar opening pressure) | 1523-027 | ||
| Oil system | Flange connection, oil tube | ||
| Gasket, dia 57/43 x 2 | 2356-260 | ||
| O-ring dia 59,92 x 3,53 (compr.) | 1331-071 | ||
| Oil by-pass (at pump) | |||
| 210 | Gasket, dia 102/55 x 1,5 (non-return valve) | 2356-092 | |
| O-ring dia 26.57 x 3,53 (non-return valve) | 1331-023 | ||
| 69 | Pressure build up for capacity reg. | ||
| Non-return valve 18, 1 bar | 1364-004 | ||
| Non-return valve 10, 02 bar | 1364-008 | ||
| Oil pump | |||
| 63 | Shaft seal complete | 1332-192 | |
| 63 | O-ring dia 44,12 x 2,62 (cover for pump) | 1331-146 | |
| 64-65 | Set of gaskets for SVA 15 | 2453-022 | |
| 60-62 | Set of gaskets for SVA 32 | ||
| 61 | Filter element 150 | 2464-233 | |
| 61 | O-ring dia 44,04 x 3,53 | 1331-022 | |
| 61 | O-ring dia 36,09 x 3,53 | 1331-018 | |
| 61 | O-ring dia 13.94 x 2,62 | 1331-014 | |
| Capacity regulation | 46 | Thermostatic three-way valve, type RT3 | |
| O-ring, Neoprene | 1331-383 | ||
| Thermo element, 48°C | 1365-005 | ||
| 70 | Solenoid valve block | ||
| Valve housing EVM (NC) | 1372-335 | ||
| Gasket set for EVM (NC/NO) | 1336-024 | ||
| Coil 10W 220V 50/60 Hz | 1372-330 | ||
| 110V 50/60 Hz | 1372-331 | ||
| 250V 50/60 Hz | 1372-334 | ||
| 71 | Solenoid valve: | ||
| Valve housing EVM (NO) | 1372-425 | ||
| Gasket set for EVM | 1336-024 | ||
| Throttle valve | |||
| 72 | Gasket set 6F | 1377-210 | |
| 73 | Solenoid valve: | ||
| See pos. 70 | |||
| 74 | Solenoid valve: | ||
| BLI Oil cooling | 80-84 | Gasket set for SVA 15-20 | 2453-022 |
| 81 | Filter FA15: | ||
| (When TEAT 20 is selected) | |||
| Gasket set for FA15 | 1377-078 | ||
| Repair kit for FA15 | 1377-250 | ||
| 81 | Filter FA20: | ||
| (When TEAT 85 is selected) | |||
| Gasket set for FA20 | 1377-079 | ||
| Repair kit for FA20 | 1377-251 | ||
| 82 | Solenoid valve EVRA15 | ||
| (when TEAT 20 is selected) | |||
| Gasket set (for EVRA15) | 1377-093 | ||
| Repair kit (for EVRA15) | 1377-099 | ||
| Coil 10W 220V 50/60 Hz | |||
| 110V 50/60 Hz See pos 70 | |||
| 250 V 50/60 Hz | |||
| 82 | Solenoid valve EVRA20 | ||
| (when TEAT 85 is selected) | |||
| Gasket set (for EVRA 20) | 1377-094 | ||
| Repair kit (for EVRA20) | 1377-069 | ||
| Coil 10W 220V 50/60 Hz | |||
| 110V 50/60 Hz See pos 70 | |||
| 250 V 50/60 Hz | |||
| 83 | Injection valve TEAT 82 | ||
| Nozzle insert 20-5 | 1371-202 | ||
| Nozzle insert 20-8 | 1371-203 | ||
| Nozzle insert 20-12 | 1371-204 | ||
| Nozzle insert 21-20 | 1371-206 | ||
| Thermal part 351B5 deg.C | 1371-255 | ||
| Thermal part 55-95 deg.C | 1371-253 | ||
| 83 | Injection valve TEAT 85 | ||
| Nozzle insert 85-33 | 1371-207 | ||
| Nozzle insert 85-55 | 1371-208 | ||
| Nozzle insert 85-85 | 1371-209 | ||
| Thermal part 35-65 deg. C | 1371-257 | ||
| Thermal part 55-95 deg.C | 1371-250 | ||
| Compr.con- nections | Spare parts set for coupling S952 size 225 | ||
| Sheets, bolts, nuts & slices | 1524-124 | ||
| Spacer bushing | 1526-002 | ||
| Stop screw M10 x 10 | 1413-250 | ||
| Combination wrench 1/2" | Compr. | ||
| Box wrench 1/2" | Tools | ||
| Alignment motor - compressor | |||
| Discs (motor up to IEC 280) | 2221-067 | ||
| Discs (motor from IEC 315) | 2221-076 | ||
| Tools | 3183-104 | ||
| Line no A401 = Normal set (part no. 3083-044) | |||
| Line no. A402 = Extended set (part no. 3083-046) | |||
| Line no. B401 = Tools for coupling alignment (part no 3183-104) | |||
| Line no. B40 = Tools for shaft seal removal, oil pump (part no 3083-160) |
| Tool no. | Designation | Part no. | A401 | A402 | B401 | B402 |
| 1 | Puller for bearings | 3083-060 | 1 | 1 | ||
| 2 | Thrust ring for the puller, female | 3083-043 | 1 | 1 | ||
| 3 | Thrust ring for the puller, male | 3083-127 | 1 | 1 | ||
| 4 | Tool for fitting the bearings | 3083-062 | 1 | 1 | ||
| 5 | Ring for the puller | 3083-042 | 1 | 1 | ||
| 6 | Tool for pressing out the rotors | 3083-063 | 1 | 1 | ||
| 7 | Tool for fitting the bearings | 3083-061 | 1 | 1 | ||
| 8.1 | Retaining cup for male rotor | 3083-097 | 1 | 1 | ||
| 8.2 | Retaining cup for female rotor | 3083-098 | 1 | 1 | ||
| 9 | Tool for dismounting the bearings | 3083-041 | 2 | 2 | ||
| 10 | Thrust washer | 3083-002 | 1 | 1 | ||
| 11 | Locking tool for rotor | 3083-126 | 1 | 1 | ||
| 20.1 | Threaded pin M10 x 160 | 2112-129 | 4 | 4 | ||
| 20.2 | Threaded pin M12 x 275 | 2112-148 | 1 | 1 | ||
| 21.1 | Hexagon head screw M16 x 130 | 1424-271 | 1 | 1 | ||
| 21.2 | Hexagon head screw M10 x 130 | 1424-203 | 4 | 4 | ||
| 22.2 | Socket cap screw M8 x 35 | 1413-359 | 1 | 1 | ||
| 22.3 | Socket cap screw M8 x 120 | 1413-314 | 2 | 2 | ||
| 22.4 | Socket cap screw M10 x 25 | 1413-371 | 4 | 4 | ||
| 22.6 | Socket cap screw M12 x 35 | 1413-387 | 1 | 1 | ||
| 22.7 | Socket cap screw M12 x 90 | 1413-400 | 1 | 1 | ||
| 23.1 | Nuts M8 Nuts M12 | 1432-063 | 2 | 2 | ||
| 23.2 | Nuts M10 | 1432-064 | 4 | 4 | ||
| 23.3 | Nuts M12 | 1432-065 | 1 | 1 | ||
| 24.1 | Washer dia. 24/13 x 2.5 | 1436-036 | 1 | 1 | ||
| 24.2 | Washer dia. 35/13 x 5 | 1436-140 | 3 | 3 | ||
| 25 | Guide pin M16 x 300 | 2112-147 | 2 | 2 | ||
| 30 | Tool for adjusting the bearings | 3083-096 | 1 | 1 | ||
| 31 | Special screw for adjusting the bearings | 3083-095 | 1 | 1 | ||
| 32.1 | Eye bolt M12 | 1427-150 | 1 | 1 | ||
| 32.2 | Eye bolt M16 | 1427-156 | 1 | 1 | ||
| 33 | Alignment device for coupling | 3183-104 | 1 | |||
| 34 | Feeler gauge | 1622-050 | 1 | |||
| 36 | Tools for shaft seal removal, oil pump Consist of: | |||||
| 36.1 | Pullef for shaft seal, oil pump | 3083-157 | 1 | |||
| 36.2 | Cap screw M10 x 75 | 1424-201 | 1 | |||
| 36.3 | Threaded pin M8 x 150 | 3083-156 | 3 | |||
| 36.4 | Nut M8 | 1432-063 | 3 | |||
| 36.5 | Punch dia. 18 x 60 | 3063-158 | 1 | |||
| 36.6 | Punch dia. 22/16,5 x 100 | 3083-159 | 1 | |||
| 40.1 | Torque wrench(Ratchet) 5 - 50 Nm 1/2" | 1 | ||||
| 40.2 | Torque wrench 40-200 Nm (14 x 18) | 1 | ||||
| 42 | Extension 1/2" | 1 | ||||
| 43 | Converter for torque wench(14x18) - 1/2" | 1 | ||||
| 44.1 | Hexagon bit adapter 1/2" - 4mm | 1 | ||||
| 44.2 | Hexagon bil adapter 1/2" - 5mm | 1 | ||||
| 44.3 | Hexagon bit adapter 1/2"- 6mm | 1 | ||||
| 44.4 | Hexagon bit adapter 1/2" - 8mm | 1 | ||||
| 44,5 | Hexagon bit adapter 1/2" - 10mm | 1 | ||||
| 44.6 | Hexagon bit adapter 1/2" - 14mm | 1 | ||||
| 45 | Box spanner insert 1/2" - 19mm | 1 | ||||
| 45.1 | Box spanner insert 1/2" - 24mm | 1 | ||||
| 45.2 | Box spanner insert 1/2" - 27mm | 1 | ||||
| 45.3 | Box spanner insert 1/2" -36mm | 1 | ||||
| 45.4 | Box spanner insert 1/2" -1/2" | 1 | ||||
| 46 | Open end spanner (14x18) - 19mm | 1 | ||||
| 50.1 | Combination spanner 17mm | 1613-276 | 1 | |||
| 50.2 | Combination spanrer 19mm | 1612-277 | 1 | |||
| 50.3 | Conbination spanner 1/2" | |||||
| 51.1 | Allen key for socket cap screw 3mm | 1512-395 | 1 | |||
| 51.2 | Allen key for socket cap screw 5mm | 1612-397 | 1 | |||
| 51.3 | Allen key for socket cap screw 6mm | 1612-398 | 1 | |||
| 51.4 | Allen key for socket cap screw 8mm | 1612-399 | 1 | |||
| 51.5 | Allen key for socket cap screw 10mm | 1612-401 | 1 | |||
| 51.6 | Allen key for socket cap screw 14mm | 1612-400 | 1 | |||
| 52 | Magnetic Fixture for dial indicator | 1 | ||||
| 53 | Dial indicator | 1 | ||||
| 54.1 | Retaining ring pliers | 1 | ||||
| 54,2 | Retaining ring pliers | 1 | ||||
| 55.1 | Hammer | 1612-012 | 1 | |||
| 55.2 | Plastic hammer | 1612-042 | .1 | |||
| 56 | Steel punch 8 mm | 1 | ||||
| 57 | Pliers for driving pin | 1612-190 | 1 |
Получить дополнительную информацию по наличию и сделать на заказ на запасные части для Sabroe SAB 128 Вы можете по тел.: (495) 921-65-00 и электронной почте: 9216500@mail.ru