Sabroe SAB 202Код: SAB 202 Цена:
не указана
Цена в руб.:
не указана
Винтовой компрессор Sabroe SAB 202 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| List of parts for SAB 202 | |||
| Relevant drawing 0661-855 | |||
| Pos | Designation | No | Part no |
| Complete compressor LF, aut. Vi | 4161-059 | ||
| Complete compressor LF, man. Vi | 4161-060 | ||
| Complete compressor LM, aut. VI | 4161-061 | ||
| Complete compressor LM, man, Vi | 4161-062 | ||
| Complete compressor SF, aut. VI | 4161-063 | ||
| Complete compressor S F, man. Vi | 4161-064 | ||
| Complete compressor SM, ant, Vi | 4161-065 | ||
| Complete compressor SM, man. Vi | 4161-066 | ||
| Compressor housing | |||
| 10-1 | Compressor housing (L) | 1 | 3011-009 |
| 10-2 | Compressor housing (S) | 1 | 3011-019 |
| Bearing cover at suction end | |||
| 20-1 | Bearing cover, female drive | 1 | 3013-089 |
| 20-2 | Bearing cover, male drive | 1 | 3013-110 |
| 21 | O-ring dia. 430,66 x 3,53, neoprene | 1 | 1331-117 |
| 22 | Innar sleeve, INA IR dia. 17/20 x 16 | 2 | 1514-018 |
| 23 | Washer dia. 25/16.5 x 4 | 4 | 2114-047 |
| 24 | mreaded plug with cottar 1/2 | 1 | 1343-027 |
| 25 | Dowty ring 025 | 1 | 1331-430 |
| 26 | Cylindrical screw M16 x 60 | 10 | 1413-436 |
| 27 | Cylindrical screw M 16 x 30 | 2 | 1413-429 |
| 28 | Cylindrical screw Ml 6 x 180 | 8 | 1413-428 |
| 30 | Hose connection | 1 | 1345-143 |
| Bearing cover at ditcharge end | |||
| 40 | Thrust cover/capacity regulating cylinder | 1 | 3013-150 |
| 41 | Cylinder screw M16 x 60 | 20 | 1413-436 |
| 42 | Washer dia. 35/16,5 x 4 | 4 | 2114-047 |
| 43 | O-ring dia. 151,93 x 3,53, neoprene | 1 | 1331-099 |
| 44 | Adjusting screw | a | 2111-128 |
| 45 | Locking screw M6 x 10 | 4 | 1413-231 |
| 46 | Cross bar for bearing adjustment | 1 | 3083-137 |
| 47 | Cylinder screw M12 x 30 | 6 | 1413-366 |
| 48 | Inner sleeve, INA IR dia 17/20 x 16 | 2 | 1514-018 |
| 49 | O-ring dia. 13,94 x 2,62 | 1 | 1331-014 |
| Cover for capacity regulating cylinder | |||
| 60 | Cover for capacity cylinder | 1 | 3013-197 |
| 61 | O-ring dia. 142,47 x 3,53 - neoprene | 1 | 1331-096 |
| 62 | Cylinder screw M12 x 35 | 4 | 1413-387 |
| Housing for capacity indicator | |||
| 70 | Housing for capacity indicator | 1 | 3045-002 |
| 71 | Cylinder screw M6 x 30 | 4 | 1413-343 |
| 72 | Cover for capacity indicator | 1 | 3045-003 |
| 73 | Cylinder screw M6 x 50 | 4 | 1413-347 |
| 74 | O-ring dia. 98.02 x 3,53, neoprene | 1 | 1331-081 |
| 75-1 | Glass for indicator (L) | t | 3045-050 |
| 75-2 | Glass for indicator (S) | 1 | 3045-049 |
| Rotors | |||
| 110-1 | Set of rotors tor SM | 1 | 3024-102 |
| 110-2 | Set of rotors tor SF | 1 | 3024-097 |
| 110-3 | Set of rotors for LM | 1 | 3024-103 |
| 110-4 | Set of rotors for LF | 1 | 3024-095 |
| 111 | Journal bearing | 4 | 1515-031 |
| 112 | Retaining pin for journal bearing dia, 5 x 45 | 4 | 1446-033 |
| 113 | Cylinder screw M6 x 45 | 8 | 1413-340 |
| 114 | Thrust washes | 2 | 3021-029 |
| 115 | Cylinder screw M16 x 45 | 2 | 1413-433 |
| 132 | Four point ball bearing dia. 70/150 x 35 | 2 | 1513-040 |
| 133 | Set of shims dia. 128/150 for adjusting the clearance between the rotor and outlet port. Comprising: 1 off thickness 5,60 mm |
2 | 3021-043 |
| 1 - 5,65 mrr | |||
| 1 - 5,70 mm | |||
| 1 - 5,75 mm | |||
| 1 - 5,80 mrn | |||
| 1 - 5,85 mm | |||
| 1 - 5,90 mm | |||
| 134 | Balance piston. drive rotor | 1 | 3025-052 |
| 135 | Spacer ring, drive rotor | 1 | 3025-035 |
| 136 | Retaining ring 4 x 10 | 1 | 1446-012 |
| 137 | Balance piston, driven rotor | 1 | 3025-034 |
| 138 | Spacer ring, driven rotor | 1 | 3025-036 |
| 139 | Retaining pin 5x16 | 1 | 1446-021 |
| DIscharga ports | |||
| 140-1 | Discharge port for male rotor . | 1 | 3031-031 |
| 141-1 | Discharge port for female rotor | 1 | 3031P032 |
| 142 | Cylinder scraw M8 x 190 | 6 | 1413-309 |
| 143 | Washer for discharge port dia. 16,5 /8,2 x 10 | 6 | 2114-045 |
| 144 | Cylinder screw M6 x 30 | 2 | 1413-343 |
| 145 | Pointed screw M10 x 35 - inside adjustment | 2 | 1413-255 |
| 146 | Locking screw M10 x 10 - inside adjustment | 2 | 1413-253 |
| 147 | Locking screw M10 x 10 - outside adjustment | 2 | 1413-253 |
| 148 | Pointed screw M10 x 20 - outside adjustment | 2 | 1413-032 |
| 149A | Blank of screw 3/8" - outside adjustment | 2 | 1343-026 |
| 149B | Gasket - outside adjustment | 2 | 1331-427 |
| Parts for adjusting rotors | |||
| 153 | Inner cover | 2 | 3021-030 |
| 154 | O-ring dia. 142,47 x 3,53 | 2 | 1331-096 |
| 155 | Cylindrical steel roll 8H 11 x 8 | S | 1514-019 |
| Shaft seal | |||
| 160A | Shaft seal collar 1 | ||
| 160B | Shaft saal seat 1 | ||
| 160C | O-ring for shaft seat collar 1 | 1 | 3084-557 |
| 160D | O-rlng for shaft saal seat 1 | ||
| 160E | Pointed screw 3 | ||
| 161 | Retaining pin for shaft seal seat dia. 3 x 5 | 1 | 1446-005 |
| 162 | Spirolox ring (oil thrower) | 1 | 1437-294 |
| 163-1 | Cover, F | 1 | 3013-100 |
| 163-2 | Cover, M | 1 | 3013-102 |
| 164 | O-ring dia, 132,94 x 3,53, neoprene | 1 | 1331-093 |
| 165-1 | Cover for shaft seal, F | 1 | 3013-099 |
| 165-2 | Cover for shaft seal, M | 1 | 3013-101 |
| 166 | O-ring dia, 158,34 x 3,53 | 1 | 1331-100 |
| 167 | Cylinder screw M12 x 35 | 8 | 1413-387 |
| 168 | Hose connection branch 1 /4° | 1 | 1345-143 |
| 169 | Clear plastic hose | 1 | 1241-190 |
| Suction filter | |||
| 170 | Suction filter | 1 | 3042-075 |
| Adjusting system for Vi-slide, AUT | |||
| 352 | Screw for transmitter M3 x 8 (included in pos. 410) | (4) | 1412-012 |
| 371 | Sealing ring OD 70 | 1 | 1332-126 |
| 372 | Attachment for pin | 1 | 3044-035 |
| 380 | Cover tor aut. Vi | 1 | 3013-196 |
| 381 | O-ring dia. 101,19 x 3,53, neoprene | 1 | 1331-083 |
| 382 | Cylinder screw M12 x 35 | 4 | 1413-387 |
| 384 | Attachment for sealing ring | 1 | 3044-034 |
| 385 | Cylinder screw M4 x 16 | 2 | 1413-320 |
| 386 | Cylindrical pin dia. 6 x 16 | 2 | 1445-076 |
| 387 | Cylinder screw M6 x 12 | 1 | 1413-339 |
| 390 | Spindle aut. Vi | 1 | 3044-063 |
| 393 | Ball baaring 6202 | 1 | 1511-012 |
| 395 | Driving disk | 1 | 3044-021 |
| 396 | Cylinder screw M4 x 12 | 1 | 1413-318 |
| 400 | Attachment tor transmitter | 1 | 3044-064 |
| 401 | Cylinder screw M6 x 80 | 4 | 1413-307 |
| 402 | Cover ring for transmitter | 1 | 3045-009 |
| 403 | Cylinder screw M4 x 10 | 4 | 1413-319 |
| 405 | Magnetic coupling | 1 | 3045-062 |
| 406 | O-ring dia. 32,99 x 2,62 (incl in pos. 405) | (1) | 1331-133 |
| 407 | Hexagon head screw M4 x 16 (inc. in pos. 405) | (1) | 1413-320 |
| 410 | Turning transmitter | 1 | 3448-004 |
| 411 | Driving lug | 1 | 3044-020 |
| 412 | Pointed screw M4 x 5 | 1 | 1413-211 |
| 413 | Clamping pin dia. 1,5 x 12 | 1 | 1446-010 |
| Adjusting system for Vi-slide, MAN | |||
| 180 | Spindle man. Vi | 1 | 3044-052 |
| 181 | Cover for man. Vi | 1 | 3013-093 |
| 182 | Sealing washer for slide stop | 1 | 3044-014 |
| 183 | Sealing ring | 1 | 1331-503 |
| 184 | O-ring dia. 44,04 x 3,53, neoprene | 1 | 1331-065 |
| 185 | Retainer for bearings | 1 | 3044-033 |
| 186 | Axial ball bearing dia. 42/25 x 11 | 2 | 1512-015 |
| 187 | Locking plate | 1 | 2114-043 |
| 188 | Cylinder screw M6 x 12 | 1 | 1413-339 |
| 189 | Thread washer | 1 | 3044-073 |
| 195 | Cylinder screw M4 x 30 | 2 | 1413-325 |
| 196 | Cylinder screw M6 x 35 | 3 | 1413-344 |
| 197 | O-ring dia. 101,19 x 3,53 | 1 | 1331-083 |
| 198 | Cylinder screw M12 x 35 | 4 | 1413-387 |
| Vi-slide | |||
| 190-1 | Slide stop, S | 1 | 3043-131 |
| 190-2 | Slide stop, L | 1 | 3043-130 |
| 191-1 | Spring for Vi-slide,L | 1 | 2144-042 |
| 191-2 | Spring for Vi-slide,S | 1 | 2144-043 |
| 192 | Cylinder screw M 10 x 25 | 1 | 1413-371 |
| Capacity regulating slide | |||
| 200-1 | Slide for L | 1 | 3043-113 |
| 200-2 | Slide for S | 1 | 3043-125 |
| 201 | Piston part inner | 1 | 3043-138 |
| 202 | Piston part outer | 1 | 3043-139 |
| 203 | O-ring dia. 40,87 x 3,53, neoprene | 1 | 1331-064 |
| 204 | Sealing ring dia. 150 | 1 | 1332-133 |
| 206 | Slotted nut KM8 | 1 | 1514-200 |
| 207A-1 | Piston rod for L | 1 | 3043-140 |
| 207A-2 | Piston rod for S | 1 | 3043141 |
| 207B | Bushing tor indicator spindle Included in pos. 207A | 1 | 3045-046 |
| 207C | Cylindrical pin dia. 6 x 16 Included in pos. 207A | 1 | 1445-076 |
| 207D | Spirolox-ring Inducted in pos. 207A | 1 | 1437-291 |
| 207E | Steel ball 3/8" Included in pos. 207A | 1 | 1514-158 |
| 208 | Locking plate for slotted nut | 1 | 1514-070 |
| 209 | Tape bearing | 2 | 2132-100 |
| 311 | Cap torew M20 x 60 | 1 | 1424-289 |
| 313 | Clamp | 1 | 3042-054 |
| Spindle for copacity indication | |||
| 210 | Spindle tor capacity indication | 1 | 3045-059 |
| 216 | Magnetic coupling | 1 | 3045-061 |
| 217 | O-ring dia. 44,12 x 2,62 (incl. in pos. 216) | (1) | 1331-146 |
| 218 | Hexagon head screw M4 x 16 (Incl. in pos. 216) | (1) | 1413-320 |
| 219 | Hexagon head screw M4 x 20 (ind. in pos. 216) | (2) | 1413-322 |
| Capacity indication | |||
| 221 | Indication disk | 1 | 3045-001 |
| 223 | Socket cap screw M4 x 10 | 1 | 1413-319 |
| 224 | Backing ring 105/90 x 1,6 | 1 | 2356-155 |
| 226 | Locking washer DC 15/8,4 | 1 | 1437-054 |
| 227 | Locking washar DC 8/4,3 | 1 | 1437-060 |
| 350 | Position transmitter | 1 | 3448-004 |
| 351-1 | Indicator glass, L (replacing pos. 75-1 when transmitter) | 1 | 3045-048 |
| 351-2 | Indicator glass, S (replacing pos. 75-2 whentransmitter) | 1 | 3045-047 |
| 352 | Screw for transmitter M3 x 8 (incl. in pos. 350) | (4) | 1412-012 |
| Non return valve | |||
| Non return valve complet | 3042-172 | ||
| 252 | O-ring dia. 253,37 x 5,33, neoprene | 1 | 1331-181 |
| 253 | Intermediate flange | 1 | 3013-288 |
| 255 | Valve housing | 1 | 3042-127 |
| 256 | Spindle guide | 1 | 3042-125 |
| 257 | Retainer | 1 | 3042-126 |
| 258 | Hexagon head screw M8 x 120 | 3 | 1413-314 |
| 259 | Valve cone | 1 | 3042-123 |
| 260 | Spindle | 1 | 3042-124 |
| 261 | Spring | 1 | 1523-033 |
| 262 | Tape bearing dim 10 x 1 x 46 | 1 | 2132-114 |
| 263 | Tape bearing dim 10 x 1 x 105 | t | 2132-096 |
| 264 | Hexagon head screw M16 x 75 | 8 | 1424-108 |
| 265 | Countersunk socket cop. screw M12 x 25 | 1 | 1413-115 |
| 266 | Hexagon bead scraw M12 x 30 | 2 | 1413-386 |
| 267 | Shaft nut KM9 - M45 | 1 | 1514-201 |
| 268 | Seeger ring dia. 14 x 1,0, DIN 471 | 1 | 1437-207 |
| Oil injection | |||
| 316 | V-joint 22-RL | 1 | 1349-153 |
| 317 | Check valve RVS | 1 | 1364-163 |
| 318 | O-ring dia. 33,05 x 1,78 | 1 | 1331-123 |
| 319 | Valve seat | 1 | 3042-077 |
| External oil piping | |||
| 320-1 | Pipe sat (L) | 1 | 3049-026 |
| 320-2 | Pipe set (S) | 1 | 3049-029 |
| 321 | Pipe clamp dia. 3 x 12 | 1 | 2532-012 |
| Oil filter | |||
| 450 | Oil filter cover | i | 3041-008 |
| 452 | O-ring dia. 132,94 x 3,53, neoprene | 1 | 1331-093 |
| 453 | O-ring dia. 101,19 x 3,53, neoprene | 1 | 1331-083 |
| 455 | Lock nut M10 | 1 | 1433-030 |
| 456 | Cylinder screw M12 x 35 | 4 | 1413-387 |
| 458 | Stay bolt for magnet | 1 | 2111-127 |
| 459 | Magnets for oil filter | 4 | 1517-022 |
| 460 | Intermediate ring | 4 | 3424-039 |
| 461 | Rubber ring | 2 | 1334-012 |
| 462 | Plug 1/4" | 2 | 1343-025 |
| 463 | Dowty ring dia. 20,57 x 13,74 | 2 | 1331-428 |
| 470 | Oil filter cartridge | 1 | 1517-015 |
| 475 | O-ring dia. 63,9 x 3,53 | 1 | 1331-071 |
| 476 | Cylinder screw M 12 x 30 | 4 | 1413-386 |
| Oil flow swich | |||
| 500 | Terminal box | 1 | 1554-001 |
| 501 | Cover for flow switch | 1 | 3041-004 |
| 502 | O-ring dia. 132,94 x 3,53, nroprere | 1 | 1331-093 |
| 505 | Nipple tor ftow switch o | 1 | 2314-106 |
| 506 | Dowty ring | 1 | 1331-433 |
| 507 | Flow switch with ball | 1 | 1553-024 |
| 508 | Washer | 1 | 2114-046 |
| 509 | Gasket dia. 19/14 x 1,5 | 1 | 2356-124 |
| 510 | Spring | 1 | 2144-041 |
| 511 | Circlip (included in pos. 507) | 1 | |
| 512 | Cylinder screw M12 x 35 | 4 | 1413-387 |
| Plugging | |||
| 520 | Plug 1/2" | 1 | 1343-027 |
| 521 | Dowty ring 025 | 1 | 1331-430 |
| 525 | Plug 3/4" | 1 | 1343-028 |
| 526 | Dowty ring 027 | 1 | 1331-433 |
| 530 | Plug 1/4" | 1 | 1343-025 |
| 531 | Gasket ring 19/14 x 1,5 | 1 | 2356-124 |
| Economizer inlet | |||
| 600 | Eco-plug | 1 | 3013-111 |
| 601 | Cylinder screw M12 x 30 | 4 | 1413-386 |
| 602 | Cylinder screw M8 x 30 | 2 | 1413-358 |
| 603 | O-ring dia. 53,57 x 3,53, neoprene | 1 | 1331-058 |
| Relief valve | |||
| 700-1 | Back pressure independent valve. BSV 8-18 bar | 1 | 2416-202 |
| 700-2 | Back pressure independent valve. BSV 8-22 bar | 1 | 2416-224 |
| Pilot operated valve | |||
| 701-A | Connection line for POV 50 | 1 | 3049-032 |
| 701-B | Connection line for POV 60 | 1 | 3049-033 |
| 702-A | Cylinder screw M12 x 25 | 4 | 1413-385 |
| 702-B | Cylinder screw M 12 x 30 | 4 | 1413-388 |
| 703-A | O-ring dia. 63,09 x 3,53 | 1 | 1331-071 |
| 703-B | O-ring dia. 88,49 x 3,53 | 1 | 1331-079 |
| 704-A | Pilot operated valve, POV 50 (for R717) | 1 | 2417-046 |
| 704-B | Pilot operated valve, POV 80 (for R22 and HCF,s) | 1 | 2417-058 |
| Cover for main valve | |||
| 705-A | Cover for POV 50 | 1 | 3013-125 |
| 705-B | Cover for POV 80 | 1 | 3013-163 |
| 706 | Cylinder screw M16 x 40 | 8 | 1413-432 |
| 707 | O-rlng dia. 253.37 x 5,33 | 1 | 1331-181 |
| Connection between compr. discharge side and suction side | |||
| 710-A | Manifold for POV 50 | 1 | 3013-124 |
| 710-B | Man (fold tor POV 80 | 1 | 3013-157 |
| 711-A | O-ring dia. 85,32 x 3,53 | 1 | 1331-078 |
| 711-B | O-ring dia. 86,49 x 3,53 | 1 | 1331-079 |
| 712-A | Cylinder screw M12 x 110 | 3 | 1413-406 |
| 712-B | Cylinder screw M12 x 30 | 4 | 1413-386 |
| 715-A | Cover (for POV 50 only) | 1 | 3013-125 |
| 716 | Cylinder screw M16 x 40 | 4 | 1413-432 |
| 717 | O-ring dia. 164,69 x 3,53 | 1 | 1331-101 |
| 720-A | Pipe conneclion for POV 50 | 1 | 3014-002 |
| 720-B | Pipe connection for POV 80 | 1 | 3013-166 |
| 721-A | Cylindar screw M12 x 30 | 8 | 1413-386 |
| 721-B | Cylinder screw M12 x 40 | 4 | 1413-388 |
| 722-A | O-ring dia. 75,79 x 3,53 | 2 | 1331-075 |
| 722-B | O-ring dia. 88.49 x 3,53 | 1 | 1331-079 |
| Releif valve connections | |||
| 725 | Stud coupling A-12 RL | 1 | 1349-053 |
| 726 | Al-gasket dia.24/13 x 1,5 | 1 | 2356-127 |
| 727 | Reducer G3/4 - G3/8 | 1 | 2312-038 |
| 729 | Elbow coupling VB 12-RL | 1 | 1349-210 |
| 730 | Union nut G1 | 1 | 2313-017 |
| 731 | Threaded nipple G3/8 | 1 | 2311-065 |
| 732 | Al-gastet dia.30/16 x 1,5 | 1 | 2356-137 |
| 733 | Dowty ring 023 | 1 | 1331-427 |
| Signal trantducers | |||
| 751 | Pressure transducer, PT1 | 1 | 1373-249 |
| 752 | Pressure transducer, PT3 | 1 | 1373-271 |
| 753 | Pressure transducer, PT4 | 1 | 1373-271 |
| 755 | Stud coupling | 2 | 1349-137 |
| 756 | Stud elbow | 1 | 1349-233 |
| 761 | Temperature transmitter, TT6 | 1 | 1373-264 |
| 762 | Temperature transmitter, TT7 | 1 | 1373-264 |
| 765 | Gasket ring | 2 | 1349-135 |
| 766 | Reducer G1/2-G1/4 | 1 | 1349-077 |
| S=L/D 1.7 M=Male drive |
| L=L/D 2,2 F=Female drive |
| Spare parts survey for SAB 202 unit |
| The following list comprises all components that can be fitted on a compressor unit. |
| From this list we have selected the components that are used on a particular unit |
| and which are indicated on the piping diagram of this instruction manual. |
| The position numbers on the piping diagram are a reference to the "Pos." columns of this list |
| The piping diagram is dedicated to the compressor number stated on page 1 of this |
| instruction manual. |
| The components in the shaded areas are variable. This may be due to voltags, refrigerant, |
| approved pressure etc. |
| On ordering spare parts it may be an advantage to receive them in sets selected |
| for your specific compressor unit. |
| A list of sets can had on request from SABROE's local representative. |
| Pos. | Designation | Part no. |
| Regulating & Control device | ||
| UNISAB Il | ||
| PT1 | Pressure transducer -1 - 9 bar | 1373-243 |
| PT2 | Pressure transducer -1-25 bar | 1373-271 |
| PT3 | Pressure transducer -1 - 25 bar | 1373-271 |
| PT4 | Pressure transducer -1 -25 bar | 1373-271 |
| TT5-6-7 | Temperature transducer PT100 | 1373-252 |
| TT5-6-7 | Temperatura transducer PT100 | 1373-264 |
| (Avaible after 97.01.20) | ||
| GT6 | Position transmittar (capacity) | 3448-004 |
| GT9 | Position transmitter | 3448-004 |
| UNISAB II Frontpanel | 1573-007 | |
| 1 CPU-Module | 1572-026 | |
| 1 Relay print | 1574-016 | |
| 1 EPROM extractor | 1613-002 | |
| 1 EEPROM extractor | 1613-003 | |
| 1 EEPROM | 1571-015 | |
| 3 Jumpers | ||
| 2 Fuses | 1572-018 | |
| 1 Screw driver | ||
| Refrigerant system | ||
| Suction: | ||
| 20 | O-ring dia. 253,37 x 5,33 | 1331-181 |
| Set of gaskets for SCV 125 (M R717) | 3184-080 | |
| Set of gaskets for SCV 150 (M R22/F R717) | 3184-081 | |
| Set of gaskets for SCV200 (F R22) | 3184-081 | |
| 24 | ||
| 34-35 | Sel of gaskets for SNV 8 | 2453-053 |
| 47-48 | ||
| Oil separator, general: | ||
| 22 | O-ring dia. 164,69 x 3,53 (disch. flange) | 1331-101 |
| 30 | Sealing ring dia. 42/49 x 6,5 | 1349-213 |
| 30 | Heating rod, 250V | 3181-038-1 |
| Heating rod, 115V | 3181-039-1 | |
| Heating rod, 230V | 3181-040 | |
| 31 | O-ring dia. 52,07 x 2,62 (Sight glass) | 1331-140 |
| Sight glass | 1226-017 | |
| 55 | O-ring dia. 329,57x5,33 (for cover) | 1331-184 |
| Oil separating element | 1517-079-2 | |
| Oil return: | ||
| 52 | Nozzle valve | 1364-151 |
| 53 | Sight glass | 1226-014 |
| 53 | Gasket dia. 40,5/33 x 1,5 | 2356-144 |
| Discharge: | ||
| 204 | Set of gaskets for SCV 100 (M) | 3184-079 |
| Set of gaskets for SCV 100 (F) | 3184-097 | |
| Safety valves: | ||
| 28 | DN 40/65 | |
| Gasket dia. 75/61 x 2,0 | 2356-220 | |
| Gasket dia. 109/95 x 2,0 | 2356-222 | |
| O-ring dia. 91,67 x 3,53 (house) | 1331-080 | |
| Conical seal for DN 40/65 | 1365-079 | |
| Spring (for 25 bar opening pressure) | 1523-027 | |
| 28 | DN 50/80 | |
| Gasket dia. 87/73 x 2,0 | 2356-221 | |
| Gaskat dia. 120/106 x 2,0 | 2356-223 | |
| O-ring dia. 117,07 x 3,53 (house) | 1331-088 | |
| Conical seal for DN 50/80 | 1365-080 | |
| Spring (for 25 bar opening pressure) | 1365-050 | |
| 28 | DN 65/100 | |
| Gasket da. 109/95 | 2356-222 | |
| Gasket dia. 149/129 | 2356-224 | |
| O-ring dia. 151,99 x 3,53 (house) | 1331-099 | |
| Conical seal for DN 65/100 | 1365-081 | |
| Spring (for 25 bar opening pressure) | 1523-035 | |
| 28 | DN 80/125 | |
| Gasket dia. 120/106 | 2356-223 | |
| Gasket dia. 175/155 | 2356-228 | |
| Gasket for safety valve house DN 80/125 | 1365-082 | |
| Conical seal for DN 80/125 | 1365-075 | |
| Spring (for 25 bar opening pressure) | 1523-036 | |
| Water-cooled oil cooler OWSG | ||
| 33 | OWSG 16xx | |
| Gasket dia. 270/150 x 5,0 | 2355-171 | |
| Gasket dia. 107/61 x 2,0 | 2357-014 | |
| Gasket dia. 36/28 x 1,5 | 2356-141 | |
| 33 | OWSG 21xx | |
| Gasket dia. 310/205 x 5,0 | 2355-172 | |
| Gasket dia. 142/90 x 2.0 | 2356-269 | |
| Gasket dia, 36/28 x 1,5 | 2356-141 | |
| O-ring dia. 34,52 x 3,53 | 1331-028 | |
| 33 | OWSG 27xx | |
| Gasket dia.370/255 x 5,0 | 2356-173 | |
| Gasket dia.162/115 x 2,0 | 2356-276 | |
| O-ring dia. 34,52 x 3,53 | 1331-028 | |
| External oil filter type BGAH | ||
| 39 | Filter element | 1517-015 |
| O-ring dia. 169,3 x 5,7 (cover) | 1331-226 | |
| O-ring dia. 130,2 x 5,34 (insert) | 1331-169 | |
| O-ring dia. 109,2 x 5,7 (element) | 1331-225 | |
| O-ring dia. 62,14 x 3,53 (collar) | 1331-077 | |
| External oil filter type OF2108 | ||
| 39 | Filter element | 1517-015 |
| O-ring dia. 170,82 x 5.33 (cover) | 1331-175 | |
| O-ring dia. 130,2 x 5,33 (insert) | 1331-169 | |
| O-ring dia. 109,2 x 5,70 (element) | 1331-225 | |
| 38-42 | Set of gaskets for SCV 50 | 3184-077 |
| Flange connection, oil tube | ||
| Gasket dia. 87/73 x 2,0 | 2356-221 | |
| O-ring dia. 63,09 x 3,53 (compr.) | 1331-071 | |
| Oil by-pass (at pump) | ||
| 210 | Gasket dia. 140/105 x 1,5 (non-return valve) | 2356-106 |
| 69 | O-ring dia. 50,40 x 3,53 (non-return valve) | 1331-300 |
| Thermostatic three-way valve, type RT6 | ||
| 46 | O-ring, Neoprene | 1331-384 |
| Thermo element (48 deg. C) | 1365-084 | |
| 70 | Solenoid valve | |
| Valve housing EVM (NC) | 1372-335 | |
| Gastet set for EVM | 1336-024 | |
| Coil 10 W 220 V 50/60 Hz | 1372-537 | |
| 110 V 50/60 Hz | 1372-538 | |
| 240 V 50 Hz | 1372-539 | |
| 71 | Solenoid valve | |
| Valve housing EVM{NO) | 1372-287 | |
| Gasket set for EVM | 1336-024-02 | |
| Coil 10 W 220 V 50/60 Hz | 1372-537 | |
| 110 V 50/60 Hz | 1372-538 | |
| 240 V 50 Hz | 1372-539 | |
| Throttle valve | 1364-151 | |
| 73 | Solenoid valve - see pos.70 | |
| 74 | Solenoid valve | |
| Valve housing EVM (NO) - see pos.71 | 027B1130 | |
| 80-84 | Gasket set for SVA 15-20 | 2453-022 |
| 81 | Filter FA15 - When TEAT 20 is selected | |
| Gasket set for FA15 | 1377-078 | |
| Repair kit for FA 15 | 1377-250 | |
| 81 | Filter FA20 - When TEAT 85 is selected | |
| Gasket set for FA20 | 1377-079 | |
| Repair kit for FA20 | 1377-251 | |
| 82 | Solenoid valve EVRA15 - When TEAT 20 is selected | |
| Gasket set (for EVRA 15) | 1377-093 | |
| Repair kit (for EVRA15) | 1377-099 | |
| Coil 10 W 220 V 50/60 Hz | 1372-537 | |
| 110V 50/60 Hz | 1372-538 | |
| 240V 50 Hz | 1372-539 | |
| 82 | Solenoid valve EVRA20 - When TEAT 20 is selected | |
| Gasket set (for EVRA20) | 1377-094 | |
| Repair kit (for EVRA20) | 1377-069 | |
| Coil 10 W 220 V 50/60 Hz | 1372-537 | |
| 110 V 50/60 Hz | 1372-538 | |
| 240 V 50 Hz | 1372-539 | |
| 83 | Injection valve TEAT 20 | |
| Nozzle insert 20-8 | 1371-203 | |
| Nozzle insert 20-12 | 1371-204 | |
| Nozzle insert 20-20 | 1371-206 | |
| Thermal part 35-65 deg. C | 1371-255 | |
| 83 | Injection valve TEAT 85 | |
| Nozzle insert 85-33 | 1371-207 | |
| Nozzle insert 85-55 | 1371-208 | |
| Nozzle insert 85-85 | 1371-209 | |
| Thermal part 35-65 deg. C | 1371-257 | |
| Ecomomizer - ECO - DN 40 | ||
| 97 | O-ring dia. 59,92 x 3,53 (tlange) | 1331-070 |
| 120 | Gasket set for SCH 40 | 3184-112 |
| 133 | Gasket set for STA 40 (2464,158) | 2453-030 |
| 133 | Filter 250 | 2464-212 |
| Ecomomizer - ECO - DN 50 | ||
| 97 | O-ring dia. 59,92 x 3,53 (flange) | 1331-070 |
| 120 | Gasket set for SCH 50 | 3184-112 |
| 133 | Gasket set for STA 50 (2464,166) | 2453-030 |
| 133 | Fiiter 250 | 2464-212 |
| Spare parts set for coupling S952 size 312 | ||
| Sheets, bolts, nuts & slices | 1524-126 | |
| Spacer bushing | 1526-004 | |
| Stop screw M 10 x 10 | 1413-250 | |
| Combination wrench 5/8" | Compr. tools | |
| Box wrench 5/8" | Compr. tools | |
| Alignment motor - compressor | ||
| Disc (motor up to IEC 280) | 2221-067 | |
| Disc (motor from IEC 315) | 2221 -076 | |
| Tools | 3183-104 |
| Tools for compressor SAB 202 |
| Line no. A401 = normal set 3083-184 |
| Line no. A402 = Extended set 3083-185 |
| Line no. B401 = Toois for aligning the coupling 3163-105 |
| Line no. B402 = Tools for shaft seal removal, oil pump 3083-160 |
| Tools no | Designation | Part no. | A401 | A402 | B401 | B402 |
| 1 | Thrust plate for puller 40 x 20 x 200 | 3083-173 | 1 | 1 | ||
| a | Puller for bearings 40 x 20 x 145 | 3083-172 | 1 | 1 | ||
| 3 | Threaded pins M12/M6 x 200 | 3083-171 | 2 | 2 | ||
| 4 | Threaded pin M14, Koko | 1427-037 | 1 | 1 | ||
| 5 | Thrust plate for mounting the bearings 40 x 15 x 150 | 3083-181 | 1 | 1 | ||
| 6 | Washer for mounting the bearings dia. 130/17 x 15 | 3083-182 | 1 | 1 | ||
| 7 | Threaded pin M16 x 200 | 3083-180 | 1 | 1 | ||
| 8 | Long nut M16 x 50 | 1432-191 | 1 | 1 | ||
| 9.1 | Nut M16 | 1432-067 | 1 | 1 | ||
| 9.2 | Nuts M12 | 1432-065 | 2 | 2 | ||
| 10 | Mounting bushing for ball bearing, inner ring | 3083-174 | 1 | 1 | ||
| 11 | Guide pins for suction- and disharge cover M16 x 300 | 3083-164 | 2 | 2 | ||
| 12 | Punch for locking the rotors | 3083-183 | 1 | 1 | ||
| 13 | Plate for locking the rotors 40 x 15 x 200 | 3083-179 | 1 | 1 | ||
| 14 | Plate for dismounting the rotors 60 x 25 x 360 | 3083-177 | 1 | 1 | ||
| 15 | Bushing dia.25/17 x 15 | 3083-178 | 2 | 2 | ||
| 16.1 | Cap screw M20 x 120 | 3083-176 | 1 | 1 | ||
| 16.2 | Cap screw M16 x 40 | 3083-175 | 1 | 1 | ||
| 17.1 | Socket cap screws M16 x 60 | 1413-436 | 2 | 2 | ||
| 17.2 | Socket cap screws M16 x 40 | 1413-432 | 2 | 2 | ||
| 17.3 | Socket cap screws M6 x 16 | 1413-340 | 2 | 2 | ||
| 18 | Washer dia 20/17 x 3 | 1436-001 | 1 | 1 | ||
| 19 | Threaded pin M 16 x 250 | 3083-168 | 1 | 1 | ||
| 20 | Thrust plate 50 x 20 x 270 | 3083-167 | 1 | 1 | ||
| 21 | Pipe pieces dia. 25.9/21.3 x 187 | 3083-170 | 2 | 2 | ||
| 22 | Threaded pins M 12 x 275 | 3083-169 | 2 | 2 | ||
| 23 | Gauge dia. 62/17 x 51 | 3083-166 | 1 | 1 | ||
| 24 | Spring dia. 50 x 9.5 | 2142-060 | 1 | 1 | ||
| 25.1 | Nuts with collar M12 | 1432-170 | 2 | 2 | ||
| 25.2 | Nut with ooiiar M16 | 1432-171 | 1 | 1 | ||
| 26 | Plate with M12 nut 20 x 6 x 100 | 3083-163 | 1 | 1 | ||
| 27-1 | Socket cap screw key with handle 5 mm | 1612-391 | 1 | 1 | ||
| 27-2 | Socket cap screw with handle M12 x 180 | 3083-165 | 1 | 1 | ||
| 2B | Eye-bol M12 | 1427-150 | 1 | |||
| 30 | Alignment device for coupling | 3183-105 | 1 | |||
| 31 | Feeler gauge (incl in3183-105) | 1622-050 | 1 | |||
| 32 | Tools for shaft seal removal, oil pump | 3083-160 | 1 | |||
| Consists of: | ||||||
| Puller for shaft seal, oil pump | 3083-157 | 1 | ||||
| Cap screw M10 x 75 | 1424-201 | 1 | ||||
| Threaded pin M8 x 150 | 3083-156 | 3 | ||||
| Nuts M8 | 1432-063 | 3 | ||||
| Punch dia. 18 x 80 | 3083-158 | 1 | ||||
| Punch dia. 22/16.5 x 100 | 3083-159 | 1 | ||||
| 40.1 | Combination spanner 19mm | 1 | ||||
| 40.2 | Combination spanner 24mm | 1 | ||||
| 40.3 | Combination spanner 30mm | 1 | ||||
| 40.4 | Combination spanner 36mm | 1 | ||||
| 41 | Open end spanner 19/22mm | 1 | ||||
| 42.2 | Hexagon bit adaptor 1/2"- 5mm | 1 | ||||
| 42.3 | Hexagon bit adaptor 1/2" - 6mm | 1 | ||||
| 42.4 | Hexagon bit adaptor 1/2" -10mm | 1 | ||||
| 42.5 | Hexagon bit adaptor 1/2'"-14mm | 1 | ||||
| 42.6 | Hexagon bit adaptor 1/2" -17mm | 1 | ||||
| 43 | Rachet spanner | 1 | ||||
| 44.1 | Torque wrench 10-60 Nm | 1 | ||||
| 44.2 | Torque wrench 50-300 Nm | 1 | ||||
| 45 | Pointed screw M 16 x 20 | 1413-262 | 2 | 2 | ||
| 46 | Box spanner insert 1/2"-36mm | 1 | ||||
| 47 | Hook spanner KM8 | 1 | ||||
| 48.1 | Extension (long) | 1 | ||||
| 48.2 | Extension (short) | 1 | ||||
| 49 | Puller, kukko 10-20 | 1 | ||||
| 50 | Dial indicator | 1 | ||||
| 51 | Magnetic fixture for dial indicator | 1 | ||||
| 52.1 | Retaining pliers J2 | 1 | ||||
| 52.2 | Retaining pliers A1 | 1 |
Получить дополнительную информацию по наличию и сделать на заказ на запасные части для Sabroe SAB 202 Вы можете по тел.: (495) 921-65-00 и электронной почте: 9216500@mail.ru